On November 18, 2026, CISA added CVE-2024-10441 to the Known Exploited Vulnerabilities (KEV) catalog. For those of us who have spent years in IR trenches, a KEV addition is not a routine catalog update — it is CISA's formal confirmation that threat actors are exploiting this flaw in the wild, today, against real networks.
The vulnerability is an improper encoding or escaping of output (CWE-116) weakness in the system plugin daemon of Synology DiskStation Manager (DSM) and Synology BeeStation OS (BSM). Successful exploitation allows a remote attacker to execute arbitrary code — no authentication requirement has been confirmed as a mitigating factor, and the attack vectors remain deliberately unspecified by the vendor. That combination — network-reachable, pre-auth, arbitrary code execution, on a device class that routinely holds an organization's backups, file shares, and surveillance footage — is exactly the profile that makes NAS platforms one of the most targeted asset classes on the internet.
This is a 2024 CVE that has come back into active play in late 2026. If you deferred patching because it looked theoretical at the time, that calculus just changed. Unpatched, internet-exposed Synology devices should be treated as presumptively targeted.
Why Synology Devices Are High-Value Targets
Before we get technical, understand the adversary's incentive structure. In my incident response engagements involving compromised NAS devices, attackers consistently weaponize them for four purposes:
- Backup destruction pre-ransomware. The first thing a mature ransomware affiliate does is find your NAS. If your backups live on a DSM device reachable from the compromised network — or worse, exposed to the internet — they get encrypted or deleted before detonation.
- Persistent, low-noise C2 infrastructure. NAS devices run Linux under the hood, are rarely covered by EDR, and are almost never monitored. A compromised DiskStation is an ideal long-term foothold.
- Data theft. Synology units frequently store consolidated file shares, Active Directory backups, and camera footage — a target-rich environment for extortion.
- Proxy/lateral movement. Compromised SOHO and edge devices are routinely chained into botnets and operational relay networks to launder attack traffic.
CVE-2024-10441 hands all four of those capabilities to a remote, unauthenticated attacker on a silver platter.
Technical Analysis
Affected Products
Per the CISA KEV entry and vendor guidance, the flaw affects the system plugin daemon in:
- Synology DiskStation Manager (DSM) — the operating system powering Synology's rack-mount and desktop NAS lines
- Synology BeeStation OS (BSM) — the consumer/prosumer personal cloud platform
Because the vulnerable component is the system plugin daemon, it runs with elevated privileges by design — meaning successful exploitation is not a low-privilege shell. You should assume root-level code execution on the appliance.
Vulnerability Class: Improper Encoding or Escaping of Output (CWE-116)
CWE-116 flaws occur when an application constructs structured output (commands, queries, web responses, plugin API calls) without properly encoding or escaping attacker-controlled input. In a daemon context, this class of bug typically resolves into one of three exploitation primitives:
- Command injection — attacker input is passed into a system shell call without sanitization
- Output-based injection into privileged plugin interfaces — crafted input causes the daemon to invoke plugins or scripts with attacker-controlled arguments
- Injection into downstream parsers — improperly escaped output consumed by another privileged component
Synology's advisory states exploitation is possible via "unspecified vectors," which from a defender's standpoint means: do not assume your configuration is safe. If the device is network-reachable, assume it is attackable.
Exploitation Status
| Attribute | Status |
|---|---|
| CVE | CVE-2024-10441 |
| CWE | CWE-116 (Improper Encoding or Escaping of Output) |
| Component | System plugin daemon (DSM / BSM) |
| Impact | Remote arbitrary code execution |
| Authentication | None confirmed as required |
| Exploitation | Confirmed active in the wild (CISA KEV, added 2026-11-18) |
| Federal mandate | BOD 26-04 — remediate within the KEV timeline or discontinue use |
Detection & Response
Detection on NAS appliances is genuinely hard — you cannot install an EDR agent on DSM. Your strategy has to be log-forwarding and network-side observation. If you do nothing else after reading this post, do this:
- Enable Syslog forwarding on every Synology device (Control Panel → Log Center → Send logs to syslog server) to your SIEM.
- Ensure your firewall/NDR logs all traffic to and from the NAS management interfaces (TCP 5000/5001 by default).
- Audit what is actually exposed: run an external scan of your public IP space for port 5000/5001 and Synology's fingerprinted login page.
Sigma Rules
The following rules assume DSM Syslog is being forwarded and ingested (e.g., via a Linux syslog collector or Windows agent). The first targets post-exploitation behavior — the NAS's web stack or daemon processes spawning shells, which should essentially never happen. The second targets shell-typical payload delivery seen in appliance compromises.
---
title: Synology NAS Service Process Spawning Shell
description: Detects DSM web or daemon processes spawning interactive shells or shell interpreters — a strong post-exploitation indicator for RCE against the system plugin daemon (CVE-2024-10441).
references:
- https://www.cisa.gov/known-exploited-vulnerabilities-catalog
- https://attack.mitre.org/techniques/T1059/
author: Security Arsenal
date: 2026/11/18
status: experimental
tags:
- attack.execution
- attack.t1059
logsource:
category: process_creation
product: linux
detection:
selection_parent:
ParentImage|contains:
- 'nginx'
- 'synoscgi'
- 'synopkg'
- 'systemd'
- 'synoagentregisterd'
- 'synocachepin'
- 'plugin'
selection_child:
Image|endswith:
- '/sh'
- '/bash'
- '/dash'
- '/ash'
- '/python'
- '/python3'
- '/perl'
- '/wget'
- '/curl'
condition: selection_parent and selection_child
falsepositives:
- Package installation or update tasks legitimately invoke scripts via sh — correlate with DSM package manager activity windows
level: high
---
title: Suspicious Payload Fetch Followed by Execution on Linux Appliance
description: Detects wget/curl fetching to a writable temp or volume path followed by chmod or direct execution — a common payload-delivery chain after appliance RCE.
references:
- https://attack.mitre.org/techniques/T1105/
author: Security Arsenal
date: 2026/11/18
status: experimental
tags:
- attack.command_and_control
- attack.t1105
logsource:
category: process_creation
product: linux
detection:
selection_fetch:
CommandLine|contains:
- 'wget http'
- 'curl http'
- 'curl -o /tmp'
- 'wget -O /tmp'
- '/dev/shm'
- '/volume1/'
selection_exec:
CommandLine|contains:
- 'chmod +x'
- 'chmod 777'
- 'sh /tmp'
- 'sh /dev/shm'
condition: 1 of selection_*
falsepositives:
- Administrator maintenance scripts run over SSH — restrict alerting to non-administrative source sessions where possible
level: high
KQL — Microsoft Sentinel
Synology DSM supports syslog forwarding, which lands in Sentinel via the Syslog connector or as CEF in CommonSecurityLog. This query hunts for authentication anomalies and daemon-side error/crash signatures against your NAS fleet, plus unexpected outbound connections from NAS IPs — the strongest signal that a compromised device has been weaponized.
// Hunt: Synology NAS compromise indicators — auth anomalies + unexpected outbound traffic
let NASDevices = dynamic(["192.168.1.10", "10.0.0.25"]); // REPLACE with your Synology device IPs
let Lookback = 14d;
union isfuzzy=true
(Syslog
| where TimeGenerated > ago(Lookback)
| where Computer has_any (NASDevices) or HostIP in (NASDevices)
| where SyslogMessage has_any ("synoscgi", "plugin", "login failed", "session", "authentication")
| where SyslogMessage has_any ("failed", "error", "segfault", "crash", "invalid", "unauthorized")
| project TimeGenerated, Computer, ProcessName, SyslogMessage, SeverityLevel
| extend Source = "Syslog"),
(CommonSecurityLog
| where TimeGenerated > ago(Lookback)
| where SourceIP in (NASDevices)
| where DeviceAction !in ("allow", "Allow") or DestinationPort !in (443, 80, 53, 123, 6690, 5000, 5001)
| summarize ConnCount = count(), Destinations = make_set(DestinationIP, 20), Ports = make_set(DestinationPort) by SourceIP, bin(TimeGenerated, 1h)
| where ConnCount > 100 or array_length(Destinations) > 10
| extend Source = "Network")
| order by TimeGenerated desc
Tune the thresholds to your environment — a backup NAS that normally talks to two cloud endpoints and one NTP server lighting up with dozens of new destinations is your alarm bell.
Velociraptor VQL
You cannot deploy Velociraptor to the NAS itself, but you can hunt the endpoints around it. When a Synology device is compromised, we routinely see attackers pivot into adjacent Windows/Linux hosts, or see workstations making unusual SMB/management connections to the appliance. This artifact hunts endpoints for anomalous connections to NAS management ports and for recently dropped executable artifacts in user-writable paths that correlate with NAS-served file shares.
-- Hunt endpoints for suspicious connections to NAS management interfaces
-- and unexpected executables in user-writable directories (pivot staging)
LET net_hunt = SELECT Pid, Name, Path AS ProcessPath,
Laddr.IP AS LocalIP, Laddr.Port AS LocalPort,
Raddr.IP AS RemoteIP, Raddr.Port AS RemotePort, Status
FROM netstat()
WHERE RemotePort in (5000, 5001, 6690)
AND Name !~ '(?i)(synology|cloud station|drive client|active backup)'
AND Status =~ 'ESTABLISHED'
LET file_hunt = SELECT FullPath, Size, Mtime,
hash(path=FullPath).SHA256 AS SHA256
FROM glob(globs=['C:/Users/*/Downloads/*.exe', 'C:/Users/*/AppData/Local/Temp/*.exe',
'C:/ProgramData/*.exe', '/tmp/*', '/var/tmp/*'])
WHERE Mtime > now() - 86400 * 7
AND NOT FullPath =~ '(?i)(windows|microsoft|google|mozilla|adobe|7-?zip)'
SELECT * FROM net_hunt
UNION ALL
SELECT FullPath AS Name, Size, Mtime, SHA256, NULL, NULL, NULL, NULL, NULL, NULL
FROM file_hunt
Remediation & Hardening Script
If you have SSH access to your Synology fleet (and if you don't, you should — SSH on a non-default port, key-based only, restricted to admin VLANs), this script inventories DSM version, checks update state, and applies the critical hardening controls. Run it per device, or wrap it in your config-management tooling.
#!/bin/bash
# CVE-2024-10441 — Synology DSM/BSM verification & hardening
# Run on the Synology device via SSH as admin, or adapt for your fleet
echo "=== [1] DSM Version Inventory ==="
cat /etc.defaults/VERSION
# Record productversion, buildnumber. Compare against the fixed builds
# in Synology's advisory: https://www.synology.com/en-global/security
echo "=== [2] Check for pending security updates ==="
synoupgrade --check 2>/dev/null || echo "Manual check required: Control Panel > Update & Restore"
echo "=== [3] HARDENING: Disable internet exposure of DSM management ==="
# Verify DSM ports are NOT forwarded on your router/firewall — check from OUTSIDE:
# nmap -p 5000,5001 <your-public-ip>
# Disable QuickConnect relay if not required (major exposure surface):
# Control Panel > External Access > QuickConnect > UNCHECK
echo "=== [4] HARDENING: Enable auto-block + firewall ==="
# Enable DSM auto-block for repeated failed logins
synowebapi --exec api=SYNO.Core.Security.AutoBlock method=set version=1 enable=true 2>/dev/null
# Ensure DSM firewall is on with a default-deny posture for management ports
# Control Panel > Security > Firewall — restrict 5000/5001 to admin subnets only
echo "=== [5] HARDENING: Enforce 2FA on all admin accounts ==="
# Control Panel > User & Group > enforce 2FA; audit for rogue accounts:
cat /etc/passwd | awk -F: '$3 < 1024 {print $1}' # review system users
echo "=== [6] FORENSICS: Preserve logs before patching (CISA Forensics Triage) ==="
tar czf /volume1/dsm-logs-$(date +%Y%m%d).tgz /var/log/ 2>/dev/null
echo "Logs archived. Review /var/log/auth.log and /var/log/synolog for pre-patch compromise."
echo "=== [7] Verify no unexpected listeners / cron entries ==="
netstat -tlnp 2>/dev/null | grep -vE '5000|5001|22|139|445|111|'
crontab -l 2>/dev/null
ls -la /etc/cron.d/ 2>/dev/null
echo "=== DONE. Now update DSM via Control Panel > Update & Restore and reboot. ==="
Remediation
- Patch immediately. Apply the latest DSM/BSM update per Synology's official advisory at
https://www.synology.com/en-global/security/advisory. The KEV entry exists because active exploitation is occurring against unpatched devices — "later this week" is not a patch timeline for this one. - Meet the BOD 26-04 deadline. Federal civilian agencies must remediate per Binding Operational Directive 26-04 (the standard KEV timeline places the due date at approximately December 9, 2026 — 21 days from catalog addition). CISA's directive is explicit: apply vendor mitigations, and if mitigations are unavailable, discontinue use of the product. Treat this as the de facto deadline for the private sector as well.
- Assume breach before patching. Follow CISA's Forensics Triage Requirements referenced in the KEV entry: preserve logs and snapshots before you patch and reboot. If the device was internet-exposed and unpatched, collect
/var/log/(especially auth and synolog logs), running process lists, cron entries, and any unexpected user accounts first. Patching a compromised device without triage just destroys the evidence. - Remove internet exposure permanently. DSM's management interface should never face the internet. Disable QuickConnect relay if you don't operationally need it, kill any port-forward rules for 5000/5001, and put remote access behind a VPN. This is the single highest-leverage control for this device class.
- Restrict management plane access. Firewall DSM management ports to a dedicated admin VLAN. Enable DSM's built-in auto-block and 2FA on all accounts. Rotate credentials and API keys on any device that was exposed and unpatched.
- Isolate the blast radius. Segment NAS devices away from workstations and domain controllers. A compromised NAS should not be able to reach your backup infrastructure's management plane or your DCs.
- Verify your backups — offline copies. If your Synology device is your backup target, confirm you have an immutable/offline copy it cannot touch. Ransomware crews specifically hunt this configuration.
The pattern here is one we've seen repeatedly across 2025–2026: appliance-class CVEs that sat dormant in patch queues get operationalized at scale, and the KEV catalog addition is the canary. Treat your Synology estate like the crown-jewel infrastructure it actually is — inventory it, patch it, get it off the internet, and watch it like a server, because to an attacker, that's exactly what it is.
Related Resources
Security Arsenal Penetration Testing Services AlertMonitor Platform Book a SOC Assessment vulnerability-management Intel Hub
Is your security operations ready?
Get a free SOC assessment or see how AlertMonitor cuts through alert noise with automated triage.