CVE-2026-60134: Weintek cMT3092X HMI Vulnerability Detection and Mitigation

---
title: Potential Privilege Escalation on Weintek HMI Web Interface
id: 8a1b2c3d-4e5f-6a7b-8c9d-0e1f2a3b4c5d
status: experimental
description: Detects potential web requests attempting to access administrative paths or configuration pages on Weintek EasyWeb interfaces, indicative of successful privilege escalation or reconnaissance.
references:
  - https://www.cisa.gov/news-events/ics-advisories/icsa-26-204-03
author: Security Arsenal
date: 2026/07/22
tags:
  - attack.initial_access
  - attack.privilege_escalation
  - ics
logsource:
  category: proxy
  product: suricata
detection:
  selection:
    c-uri|contains:
      - '/admin'
      - '/config'
      - '/userconfig'
      - '/sys_config.php'
  condition: selection
falsepositives:
  - Legitimate administrative maintenance by authorized engineers
level: high
---
title: Web Access to Weintek cMT3092X EasyWeb Interface
id: 9d2e3f4a-5b6c-7d8e-9f0a-1b2c3d4e5f6a
status: experimental
description: Identifies traffic directed towards known Weintek HMI web interfaces to track access patterns and potential brute-forcing or cookie manipulation attempts.
references:
  - https://www.cisa.gov/news-events/ics-advisories/icsa-26-204-03
author: Security Arsenal
date: 2026/07/22
tags:
  - attack.reconnaissance
  - ics
logsource:
  category: webserver
  product: easyweb
detection:
  selection:\    cs-host|contains:
      - 'cMT3092X'
    c-uri|contains: 
      - '/index.html'
      - '/login'
  filter_legit:
    SrcIp|startswith: 
      - '10.'
      - '192.168.'
  condition: selection | not filter_legit
falsepositives:
  - Authorized access from internal engineering subnets
level: medium

// Hunt for administrative access or configuration changes on Weintek HMIs
let WeintekHMI = "cMT3092X";
DeviceNetworkEvents
| where RemotePort in (80, 443, 8080)
| where RemoteUrl has_any ("admin", "config", "user") 
| where DeviceName contains WeintekHMI or InitiatingProcessCommandLine contains WeintekHMI
| project Timestamp, DeviceName, InitiatingProcessAccountName, RemoteUrl, RemoteIP
| order by Timestamp desc

-- Hunt for active network connections to Weintek HMI default web ports
SELECT Fqdn, Pid, Name, UserName, RemoteAddress, RemotePort, State
FROM listen_sockets()
WHERE Port IN (80, 443, 8080)
  AND Protocol = 'tcp'
-- Check for specific process names if Weintek service runs on Windows Jump Hosts
  OR Name =~ 'EasyWeb'

#!/bin/bash
# Network Discovery Script for Weintek cMT3092X Vulnerability (CVE-2026-60134)
# This script scans a defined subnet for Weintek HMIs and checks the HTTP Server header for version indicators.

TARGET_SUBNET="192.168.1.0/24" # Replace with your OT subnet
PORT=80

echo "[*] Scanning $TARGET_SUBNET for Weintek HMI devices on port $PORT..."

# Using nmap to scan for web servers and grab http-server-header
# Note: Adjust nmap path based on your distro
if command -v nmap &> /dev/null; then
    nmap -p $PORT --open -sV --script http-server-header $TARGET_SUBNET 2>/dev/null | grep -B 4 "Weintek"
else
    echo "[!] Nmap not found. Please install nmap to run this scan."
fi

echo "[*] Manual Verification Required:"
echo "    1. Access the web interface of identified devices."
echo "    2. Navigate to System Settings -> Firmware Info."
echo "    3. If Firmware is < 20210218, the device is VULNERABLE."
echo "    4. If EasyWeb version is < v2.1.20, the device is VULNERABLE."